Accessories
Taylor Test Kit
Our Price: $12.99
POOL & SPA WATER TESTS
1. Read precautions on all labels.
2. Keep test kit out of reach of children.
3. Store test kit in cool, dark place.
4. Replace reagents once each year.
5. Do not dispose of solutions in pool or spa.
6. Rinse cells before and after each test.
7. Obtain samples 18" (45 cm) below water surface.
8. Hold bottle vertically when dispensing.
Free Chlorine Test
1. Rinse and fill chlorine cell to mark with water to be tested.
2. Add 5 drops R-0001 and 5 drops R-0002. Cap and invert to mix.
3. Match color with color standard. Record as parts per million (ppm)
free chlorine. See dosage chart for adjustment.
Total Bromine Test
1. Rinse and fill bromine cell to mark with water to be tested.
2. Add 5 drops R-0001 and 5 drops R-0002. Cap and invert to mix.
3. Match color with color standard. Record as parts per million (ppm)
total bromine. See manufacturer's instructions for adjustment.
pH Test
1. Rinse and fill pH cell to mark with water to be tested.
2. Add 5 drops R-0014. Cap and invert to mix.
3. Match color with color standard. Record as pH units. If sample color
is between two values, pH is average of the two. See dosage charts
for adjustment.
Upgraded Kits Available
This kit is designed for testing pools and spas with low bather loads.
Upgrading to a DPD kit with more tests is recommended for those with
higher usage or recurrent water problems such as pH "bounce," algae,
strong odor, eye irritation, bleaching, staining, or corrosion.
For Chlorine Chart
See printed instruction for chart.
* Chlorine products contain different amounts of available chlorine.
Adjust treatment amounts accordingly.
For pH Chart
See printed instruction for chart.
** Sodium bisulfate percentage may vary
Adjust treatment amounts accordingly.
Dosages obtained experimentally using pool water with the following values:
Total Alkalinity ~100 ppm CaCO3
Calcium Hardness ~200 ppm CaCO3
Total Dissolved Solids ~500 ppm
Temperature ~75 degrees F (24 degrees C)
1. Read precautions on all labels.
2. Keep test kit out of reach of children.
3. Store test kit in cool, dark place.
4. Replace reagents once each year.
5. Do not dispose of solutions in pool or spa.
6. Rinse cells before and after each test.
7. Obtain samples 18" (45 cm) below water surface.
8. Hold bottle vertically when dispensing.
Free Chlorine Test
1. Rinse and fill chlorine cell to mark with water to be tested.
2. Add 5 drops R-0001 and 5 drops R-0002. Cap and invert to mix.
3. Match color with color standard. Record as parts per million (ppm)
free chlorine. See dosage chart for adjustment.
Total Bromine Test
1. Rinse and fill bromine cell to mark with water to be tested.
2. Add 5 drops R-0001 and 5 drops R-0002. Cap and invert to mix.
3. Match color with color standard. Record as parts per million (ppm)
total bromine. See manufacturer's instructions for adjustment.
pH Test
1. Rinse and fill pH cell to mark with water to be tested.
2. Add 5 drops R-0014. Cap and invert to mix.
3. Match color with color standard. Record as pH units. If sample color
is between two values, pH is average of the two. See dosage charts
for adjustment.
Upgraded Kits Available
This kit is designed for testing pools and spas with low bather loads.
Upgrading to a DPD kit with more tests is recommended for those with
higher usage or recurrent water problems such as pH "bounce," algae,
strong odor, eye irritation, bleaching, staining, or corrosion.
For Chlorine Chart
See printed instruction for chart.
* Chlorine products contain different amounts of available chlorine.
Adjust treatment amounts accordingly.
For pH Chart
See printed instruction for chart.
** Sodium bisulfate percentage may vary
Adjust treatment amounts accordingly.
Dosages obtained experimentally using pool water with the following values:
Total Alkalinity ~100 ppm CaCO3
Calcium Hardness ~200 ppm CaCO3
Total Dissolved Solids ~500 ppm
Temperature ~75 degrees F (24 degrees C)